DMJ Racing Original Archives | DMJ Racing

Here you can find our own designed 3d parts which are then manufactured in ABS and PLA (3d printed in house except for our aluminum and steel parts)

Chassis clamp for fuel and wiring V2

$2.99

Never tie you wiring or fuel line with tie downs again ,with these chassis clamps you use one tie down and then you use the clamp to secure your wiring , cables and fuel lines. These version 2 brackets have no hinge and stay open with a little gap which is normal. They fit on 28 , 30 , 32 mm tubing

ABS 22 4 8d washer

$0.20

ABS at its best our washer is the lightest and the strongest at this price!

ABS 24 by 5 by 9d washer

$0.36

ABS at its best our washer is the lightest and the strongest at this price!

Chassis protector kit of 3

Add these protective chassis plates to your kart and give your chassis protection on the track. These plates will prolong your chassis life and reduce or prevent flat spotting of the waist rails and keep your frame looking and working like new. This kit will not affect kart handling like larger ones.

Sold as a kit of 3 Protector Plates
Has 6 mounting points to allow mounting in several different areas.
The plates are made of tough ABS
Mounting does require drilling of the floor tray.
Color: Black only

Universal fit on most karts, including cadets, kid karts. Drilling of mounting holes in floor pan may be required. This is chassis protector kit intended to be used as a kit of 3 3 plates included Does not including mounting hardware

Fuel and accelerator line holder

ABS 63 by 2 by 8d

$0.45

ABS at its best our washer is the lightest and the strongest at this price!

ABS KART 50MM WHEEL HUB ABS AXLE SPACER KIT

Kit Contains 2 spacers of each size: 3mm, 5mm, 7mm, 10mm, 15mm, 20mm

ABS Heel Rest

$7.85

K920A Foot rest

ABS 20 by 12 by 8d washers

$0.32

ABS at its best our washer is the lightest and the strongest at this price!

ABS KART 40MM WHEEL HUB ABS AXLE SPACER KIT

$22.00

Kit Contains 2 spacers of each size: 3mm, 5mm, 7mm, 10mm, 15mm, 20mm

Double Stack Kart Stand V-aluminum boxed top section

Designed in house with 100% aluminum frame no welds so easy to assemble and disassemble. -now standard with bottom and top shelf - This model comes with all aluminum brackets even for the top part which is slotted no need to unbolt. -Big 8 inch all-terrain wheels with 2 casters at the front. -Very light compared to the competition. -includes 4 feet of rubber gasket uncut for your to cut to the length that best suits your needs – Want to have your stand assembled for you a ready of local pick-up please follow this link and add to your basket If not in stock our lead time to back order presently is usually 3 days if you have any questions please do not hesitate chat with us or call us !

Chassis protector 2.0 kit of 3

2.0 , updated and ready to protect your chassis better then ever. Add these protective chassis plates to your kart and give your chassis protection on the track. These plates will prolong your chassis life and reduce or prevent flat spotting of the waist rails and keep your frame looking and working like new. This kit will not affect kart handling like larger ones.

Sold as a kit of 3 Protector Plates
Has 6 mounting points to allow mounting in several different areas.
The plates are made of tough PETG or abs
Mounting does require drilling of the floor tray.
Color: Black , transparent or white.
Presently only transparent color available

Universal fit on most karts, including cadets, kid karts. Drilling of mounting holes in floor pan may be required. 3 plates included Does not including mounting hardware

DMJ Racing seat installer

This seat installer is compact less expensive then the competition, lighter and keeps seat height in memory for faster seat install and repeatability at fractions of the cost of the competition.

ABS feet rest

Feet support is approximately 150mm in length and is made of high strength ABS. comes with bottom clamp without hardware if in back order usually available within 2 days

10 series 8 hole rectangle joining plate

10 series 180 degree 10 hole joining plate

$7.50

1

10 series 5 hole 90 degree plate corner

10 series 5 hole 90 degree plate

Chassis clamp for fuel and wiring V3 E.D

$2.50 – $2.99

These versions are news but have minor esthetic defects, get the same great chassis clamp for less! Never tie you wiring or fuel line with tie downs again ,with these chassis clamps you use one tie down and then you use the clamp to secure your wiring , cables and fuel lines. These version 2 brackets have no hinge and stay open with a little gap which is normal. They fit on 28 , 30 , 32 mm tubing

Chassis clamp for fuel and wiring V3

$2.99

Never tie you wiring or fuel line with tie downs again ,with these chassis clamps you use one tie down and then you use the clamp to secure your wiring , cables and fuel lines. These version 2 brackets have no hinge and stay open with a little gap which is normal. They fit on 28 , 30 , 32 mm tubing

3/8 socket holder

$9.00

This Socket holder can hold up to ten 3/8 sockets and can be snapped together with other socket holders.

Chassis protector 2.0

$13.00

2.0 , updated and ready to protect your chassis better then ever. Add these protective chassis plates to your kart and give your chassis protection on the track. These plates will prolong your chassis life and reduce or prevent flat spotting of the waist rails and keep your frame looking and working like new. This kit will not affect kart handling like larger ones.

Sold as a Single Protector Plate
Has 6 mounting points to allow mounting in several different areas.
The plates are made of tough PETG or abs
Mounting does require drilling of the floor tray.
Color: Black , transparent or white.

Universal fit on most karts, including cadets, kid karts. Drilling of mounting holes in floor pan may be required. This is a replacement chassis protector intended to be used as a kit of 3 1 plate included Does not including mounting hardware

Self closing clothes dryer air vent light cosmetic defects

This Dryer air vent is made of PETG and comes ready to paint to protect from the UV rays . Very light weight and small form factor, this vent can be installed anywhere. How it works https://youtube.com/shorts/p546EO-arms When the air pressure for the dryer pushes on the piston , the piston pushed up on to the outside top housing and lets the air out. When the dryer stops the piston comes back down to seal completely the 4 inch vent.

Self closing clothes dryer air vent

This Dryer air vent is made of PETG and comes ready to paint to protect from the UV rays . Very light weight and small form factor, this vent can be installed anywhere. How it works https://youtube.com/shorts/p546EO-arms when the air pressure for the dryer pushes on the piston , the piston pushed up on to the outside top housing and lets the air out when the dryer stops the piston comes back down to seal completely the 4 inch vent.

ABS 30 by 6.5 by 8

$0.26

ABS at its best our washer is the lightest and the strongest at this price!

ABS 20 by 4 by 6d washer

$0.20

ABS at its best our washer is the lightest and the strongest at this price!

ABS square heel rest

$2.65

Chassis protector

$18.00

Add these protective chassis plates to your kart and give your chassis protection on the track. These plates will prolong your chassis life and reduce or prevent flat spotting of the waist rails and keep your frame looking and working like new. This kit will not affect kart handling like larger ones.

Sold as a Single Protector Plate
Has 6 mounting points to allow mounting in several different areas.
The plates are made of tough ABS
Mounting does require drilling of the floor tray.
Color: Black only

Universal fit on most karts, including cadets, kid karts. Drilling of mounting holes in floor pan may be required. This is a replacement chassis protector intended to be used as a kit of 3 1 plate included Does not including mounting hardware

Kartlasers V2

Kartlasers V2 is the evolution of the V1 in terms of how the laser is calibrated and the construction material which is resin as opposed to ABS like in the V1 Front End Laser Alignment for Camber and Toe on Karts with magnetic and tie rap attachments The level on the top makes sure that the lasers are level before making any adjustments. Kartlasers V2 fits on 17mm or 25mm stub axles or 40mm hubs. Once the lasers have been positioned, each of them will beam the precise position of the spindle on the graduated grid of the other, with the classic laser "dot". Disclaimer: When using the kartlasers v2 please be careful when setting on either the axle or spindle same goes when taking it off. The Kartlasers v2 are made of resin not metal. We are not responsible for any damage to the kartlasers while using . Free shipping insurance only covers the first 100$ if you wish to purchase additional coverage please follow this link https://dmjracing.com/product/shipping-insurance/ Kartlasers V2 comes with a custom plastic case with padding. Works with 4 AA batteries not included.

Double Stack Kart Stand V-aluminum

Designed in house with 100% aluminum frame no welds so easy to assemble and disassemble. - This model comes with all aluminum brackets even for the top part which require to be loosened to take of! -Big 8 inch all-terrain wheels with 2 casters at the front. -Very light compared to the competition. -includes 4 feet of rubber gasket uncut for your to cut to the length that best suits your needs – Want to have your stand assembled for you a ready of local pick-up please follow this link and add to your basket If not in stock our lead time to back order presently is usually 3 days if you have any questions please do not hesitate chat with us or call us !

1/18 Mini wind tunnel diecast

Original price was: $450.00.Current price is: $425.00.
1/24 Mini wind tunnel diecast

Original price was: $325.00.Current price is: $315.00.
1/64 Mini wind tunnel diecast

Original price was: $225.00.Current price is: $215.00.
WASHER M6X12

Original price was: $0.12.Current price is: $0.09.